How to reduce the wear between the stainless steel wire rope and the pulley? The following is a brief explanation for you.

       In places such as cranes, hoists, or some university cargo transportation bundling, the use of steel wire ropes is relatively ordinary because of the strong tensile strength. Wire ropes are often used together with pulleys during lifting or other use. Generally, customers with experience will find that when stainless steel wire ropes are used with pulleys, the parts of the steel wire ropes in contact with the pulleys are easy to wear. After long-term use It will shorten the service life of stainless steel wire rope and pulley, how to solve it? I will give you a brief introduction below.

       Stainless steel wire ropes and pulleys will be worn to different degrees after long-term working friction. When the wire rope is running under a large load, the pulleys and stainless steel wire ropes wear seriously. If you want to reduce the wear between the two, change the stainless steel wire rope And the service life of the pulley, lubricating oil can be often applied between the stainless steel wire rope and the pulley, or by increasing the contact area between the pulley and the stainless steel wire rope, the friction and wear between the two can be reduced, which can help change The service life of pulleys and stainless steel wire ropes. In addition, it should be noted that overloading must not be used during operation, which will greatly increase the wear between the two.

       These means can reduce the friction between the stainless steel wire rope and the pulley, but even if you do the above work, you need to check the wear of the stainless steel wire rope and the pulley regularly, and replace it in time to ensure the operation. The stability.